Clearing Acknowledged Alarms; Context Menu Options - Honeywell MAXPRO Operator's Manual

M O N I T O R I N G A S I T E
5
Alarms

Clearing Acknowledged Alarms

You can clear the acknowledged alarms after taking the necessary action.
To clear an acknowledged alarm
1.
2.
Note:
3.
If you have selected multiple alarms, then all the alarms are cleared.
To clear all the acknowledged alarms
•

Context Menu Options

When you right-click on the list of acknowledged alarms in the second table, a context menu
appears. The following table lists the commands in the context menu:
164
Click the Viewer tab.
Click to select the alarm you want to clear in the Alarm window. The acknowledged
alarms are listed in the second table in the Alarm window.
To select more than one unacknowledged alarm, press the CTRL key.
Click Clear. The alarm is removed from the list of acknowledged alarms.
Click Clear All. All the acknowledged alarms are cleared and removed from the list of
acknowledged alarms.
Command
Clear
Clear All
Show Video
Show Preview Pane
Show Details
Click to....
clear the selected acknowledged alarm.
clear all the acknowledged alarms.
view video from the time corresponding to
the occurrence of the event that triggered the
alarm. The video is played in the currently
selected panel in the salvo layout.
Note: The video is played only when the
video recording is available.
view video related to the alarm in a four panel
salvo layout. See Setting Preferences
for more information.
view the details of the alarm. This feature lists
the device from which the alarm was
triggered, description, date time when the
alarm was triggered, status of the alarm,
global event ID, and the event attribute
associated to the alarm. You can also use the
previous and next buttons to view the details
of the alarms listed in the alarms window.
MAXPRO NVR 3.1 Operator's Guide
section