MAXPRO NVR 3.1 Operator's Guide
4.
Set up the MAXPRO NVR.
•
In the Name field, enter the name of the unit to which you wish to connect.
•
In the IP Address field, type the address of the unit.
•
Click Save.
Apple mobile device
Tap Setup in the top left hand corner.
5.
The name and IP address of the NVR populates. Tap the name to enable the NVR (check
mark displays).
6.
To return to the log on dialog:
Apple mobile device
Tap Setup.
MAXPRO Mobile App
Android mobile device
Tap the cog wheel in the top left hand
corner.
Android mobile device
Tap the Back arrow.
A P P E N D I X A
209