Template Operations; Adding A Template - Honeywell XI581AH User Manual

XI581/2 BUSWIDE OPERATOR INTERFACE
Modify the System Clock

Template Operations

Template Buffer
Template Search
Access Level
Select Data Point from the Main Menu
3. Use the arrow keys to move to and highlight the appropriate field (Date, Time,
Daylight Savings Start, or End). Press Enter (↵) to complete the selection.
RESULT: The first, left-most digit that you can modify blinks.
4. Use the plus or minus keys to increment or decrement the digit, respectively.
When the digit is correct, use the arrow keys to move to the next digit. Repeat
this procedure until all digits are correct.
5. Press Enter (↵) to complete the system clock entry.
Use the arrow keys to move to and highlight the next field for modification. Press
Enter (↵) to complete the selection.
Use the plus and minus keys to change digits as before. Press Enter (↵) to
complete the date or time entry.
6. Use the down arrow key to move to and highlight Back and then press Enter (↵)
to complete the selection.
RESULT: The display window lists the 'System Clock' options.
7. When you are finished, repeatedly press Cancel (C) to return to the Main Menu.
Template A template is a structure specifying a string of characters to be used for point
searches. Characters in the template include any that can be used in a user
address as well as special characters such as the asterisk, *, that represents any
number of random characters and the question mark, ?, that represents exactly one
random character.
The template buffer is where defined templates are stored in the controller.
The template search function generates a list of user addresses which match a
specified template. This function helps you to filter a small set of user addresses out
of the total set of user addresses in large applications.
For example, a template string such as FLOOR1* can concentrate the search for all
user addresses related to the first floor of a building:
FLOOR1_TEMP
FLOOR1_RH
FLOOR1_PRESS
FLOOR1_FAN
Purpose To add a new template to the template buffer of your application. You create new
templates by modifying existing user addresses.
You must have access level 2 or 3 to perform this task.
1. From the main menu, use the arrow keys to move to and highlight Data Points.
Press Enter (↵) to complete the selection.
RESULT: The 'Data Points' screen displays.
Data Points
User Address
Manual Operation
Accumul. Runtime
Type Selection
Points in Trend
Suppress Alarm
Add Template
Delete Template
Modify Template
Template Search
71
ALPHABETIC REFERENCE

Adding a Template

EN2B-0126 (74-3554-8)