Creating a Sequence
MAXPRO NVR 3.1 Operator's Guide
Configuring the Sequences
A sequence is a set of live video streamed one after the other from cameras for a specified
time interval. You can select the cameras or presets to be included in a sequence and also
specify the time interval for which the video from each camera or preset must be displayed.
Note:
Presets must be defined for the cameras before including them in the sequence.
You can create a sequence to display video that is captured from different cameras connected
to MAXPRO NVR.
Note:
You can add a maximum of 50 sequences in MAXPRO NVR.
To create a sequence
1.
Click the Configurator tab. The System page displays by default.
2.
Click the Sequence tab to navigate to the Sequence page.
Figure 4-34
Sequence page
3.
Click Add.
4.
Under Details
•
The Sequence Name appears by default. You can type a new Sequence Name as
applicable.
C O N F I G U R I N G M A X P R O N V R
Configuring the Sequences
113