Context Menu Options - Honeywell MAXPRO Operator's Manual

Context Menu Options

MAXPRO NVR 3.1 Operator's Guide
Skipping enables you to easily locate the portion you want to view in a video
recording. This is particularly useful when the video recording spans across a long
time interval.
Click the drop-down arrow on the
playing and select a time interval. Click
jump forward. The video jumps to the selected time interval.
• Sync video
Sync video allows you to synchronize the display of video from multiple cameras. In
the salvo layout, select the cameras, then select the Sync check box on the timeline
window or click
mode. Any actions performed like jump and forward is synched in the entire salvo
layout. When a new camera is dragged and dropped, the video from that camera is
also synched.
Note
• The Sync video feature only consumes one playback session out of 32
playback sessions available in MAXPRO NVR.
• Using this feature, you can playback the selected camera's sync time with a
camera in playback mode using a single playback session.
• Reverse playback mode is not supported. Use Jump to traverse reverse.
• The maximum number of playback streams supported is 9 in sync mode.
A context menu appears when you right-click on a panel displaying live video. The following
table lists the commands in the context menu:
Command
Full Screen
Remove Text Overlay
Digital PTZ
Add Bookmark
the to jump backward or click
on the tool bar above salvo layout to enable sync playback
Click to...
maximize the salvo layout to full screen.
Alternatively, you can click
toolbar on the top of the salvo layout.
to remove text overlay displayed on the
video.
Alternatively, you can click in the toolbar on
the top of the salvo layout.
enable digital PTZ. See Panning Tilting and
Zooming for information on digital PTZ. See
Panning, Tilting, and Zooming
add a bookmark in the timeline. You can also
add a bookmark by pressing the CTRL + B
keys.
M O N I T O R I N G A S I T E
Timeline
while video is
to
in the
section.
137