Maxpro Nvr Wizard; Configuration Page - Honeywell MAXPRO Operator's Manual

MAXPRO NVR Wizard

MAXPRO NVR Wizard is an easy three-step procedure to live video for Honeywell devices.
This wizard automatically starts each time you power on the MAXPRO NVR system.
1.
Figure 1-1
MAXPRO NVR 3.1 Operator's Guide
Step 1 - The CONFIGURATION page appears.

CONFIGURATION page

• If you want to change the default settings, select "YES" or "NO"corresponding to the
fields listed in the following table or click STEP 2 to accept the default settings, and
proceed to the CAMERA DISCOVERY page in
Field Description
CONFIGURATION SETTINGS
Video Format Select "NTSC" or "PAL" based on your region.
Start Recording Start recording as soon as soon as the camera is added. 24/7
continuous recording is enabled for all the cameras.
Dynamic IP MAXPRO NVR software automatically synchronizes any change
Synchronization in the camera's IP address.
For example. if a camera is restarted, and a new IP is associated
to the camera, then the MAXPRO NVR software automatically
detects the changed IP address and synchronizes it to the
camera so that live viewing and recording is not disturbed.
Auto Add Any newly connected camera is automatically discovered and
Discovered added to the camera's list.
Camera
step 2.
1
31