Updating a Sequence
Deleting a Sequence
MAXPRO NVR 3.1 Operator's Guide
Updating a sequence allows you to change the sequence of video display from cameras.
To update a sequence
1.
Click the Configurator tab. The System page displays by default.
2.
Click the Sequence tab to navigate to the Sequence page.
3.
Select the check box corresponding to the sequence you want to update.
4.
You can change the sequence name, dwell time and sequence of the cameras.
5.
Click Save.
To delete a sequence
1.
Click the Configurator tab. The System page displays by default.
2.
Click the Sequence tab to navigate to the Sequence page.
3.
Select the check box corresponding to the sequence you want to delete.
4.
Click Delete. A confirmation message appears on the top of the display area.
5.
Click Yes.
C O N F I G U R I N G M A X P R O N V R
Configuring the Sequences
115