MAXPRO NVR 3.1 Operator's Guide
Note:
For Analog cameras, motion detection is only supported through Smart (Server)
VMD. For further details on options and steps for configuring Motion based
recording, see Appendix A,
Configuration
section.
•
Video Channel Number - Specify the physical slot number of the analog capture
card.
Note:
Based on the Analog Capture Card model, system will prompt a message to add
all supported channels by default. Click Yes to add all supported channels or No
to add only 1 channel.
4.
Click
to open the Camera Advanced Settings pane.
Figure 4-26
Camera Advanced Settings pane
Note:
The Camera Advanced Settings pane is disabled when there are no cameras
available in the system.
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
VMD Settings and Motion-based Recording
101