Discovering And Adding Third Party Psia, Onvif And Axis Cameras - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
4
Configuring the Cameras
Note:
To configure the Advanced Discovery Settings
Note:
Note:
Discovering and Adding Third Party PSIA, ONVIF and AXIS
Cameras
The third party PSIA, ONVIF and AXIS cameras that are discovered in the MAXPRO NVR user
interface do not display the model name. However, the Camera Type field associated to the
ONVIF, PSIA, and AXIS cameras displays "ONVIF DEVICE", "PSIA DEVICE" and "No Streamer
Type" in the Discovery window on the Camera page. You can also enable audio for these
cameras, provided the camera supports the audio feature.
Figure 4-6
80
Advanced Discovery Settings are only applicable for PSIA, ONVIF compliant and
AXIS cameras.
• On the Camera page>Advanced Discovery Settings pane, perform the following:
• Select "NTSC" or "PAL" from Set Video Format list.
• Type a Username for the camera.
• Type a Password for the camera.
You are prompted to type the username and password for a PSIA, ONVIF and
AXIS cameras.
• Click Apply to save the changes or click Reset to clear the information entered.
The username and password entered is applicable for all NTSC or PAL cameras.
However, the username and password can be changed while configuring a
particular camera.
Camera Type field displaying "ONVIF DEVICE" for a ONVIF camera
MAXPRO NVR 3.1 Operator's Guide