Generating The Operator Log Report; Operator Log Report - Honeywell MAXPRO Operator's Manual

MAXPRO NVR 3.1 Operator's Guide

Generating the Operator Log Report

To generate the operator log report
1. Click the Report tab.
2. In the Reports window, select the Operator Log Report.
3. Click Show Report. The Operator Log Report dialog box appears.
Figure 7-2

Operator Log Report

4. In the Date box, select the date for which you want to view the list of events. The following
table lists the options in the Date box:
Option
Today
Yesterday
Last 7 days
Custom Date Range
5. In the Operators box, select the check box next to the operators for which you want to
generate the operator log report. You can select the Select All check box to select all the
operators.
6. In the Activities box, select the check box next to the activities which you want to view in
the operator log report. You can select the Select all check box to select all the activities.
7. In the Output type box, select the type of operator log report you want to generate. You
can select Tabular to view the operator log report in a table or Graphical to view the
operator log report in a graph.
8. Click Generate Report. The operator log report is generated and appears in the display
area.
Generating the Operator Log Report
Description
operator log report for today's events.
operator log report for yesterday's events.
operator log report for the last seven day's events.
operator log report between a start date and end date.
The From and To boxes under Custom Date Range are
enabled when you select this option. You can select the
start date in the From box and the end date in the To
box.
G E N E R A T I N G R E P O R T S
197