Setting To Output System Information To A Monitor Terminal - 3Com 4210 9-Port Configuration Manual

Enabling system information display on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Table 1-9 Enable the system information display on the console:
Operation
Enable the debugging/log/trap
information terminal display function
Enable debugging information
terminal display function
Enable log information terminal
display function
Enable trap information terminal
display function
Make sure that the debugging/log/trap information terminal display function is enabled (use the
terminal monitor command) before you enable the corresponding terminal display function by using
the terminal debugging, terminal logging, or terminal trapping command.

Setting to Output System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, VTY, or TTY user interface.
Setting to output system information to a monitor terminal
Table 1-10 Set to output system information to a monitor terminal
Operation
Enter system view
Enable the information
center
Enable system information
output to Telnet terminal or
dumb terminal
Configure the output rules
of system information
Command
terminal monitor
terminal debugging
terminal logging
terminal trapping
Command
system-view
info-center enable
info-center monitor channel
{ channel-number |
channel-name }
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
1-10
Description
Optional
Enabled by default.
Optional
Disabled by default.
Optional
Enabled by default.
Optional
Enabled by default.
Description
—
Optional
Enabled by default.
Optional
By default, a switch outputs
log/debugging/trap information to
a user terminal through
information channel 1.
Optional
Refer to Table 1-8 for the default
output rules of system information.