Configuring An Aaa Scheme For An Isp Domain - 3Com 4210 9-Port Configuration Manual

If you have configured to use "." as the delimiter, for a user name that contains multiple ".", the first
"." will be used as the domain delimiter.
If you have configured to use "@" as the delimiter, the "@" must not appear more than once in the
user name.
If the system does not find any available accounting server or fails to communicate with any
accounting server when it performs accounting for a user, it does not disconnect the user as long
as the accounting optional command has been executed, though it cannot perform accounting for
the user in this case.
The self-service server location function needs the cooperation of a RADIUS server that supports
self-service, such as comprehensive access management server (CAMS). Through self-service,
users can manage and control their account or card numbers by themselves. A server installed
with self-service software is called a self-service server.
3Com's CAMS Server is a service management system used to manage networks and ensure network
and user information security. With the cooperation of other networking devices (such as switches) in a
network, a CAMS server can implement the AAA functions and right management.

Configuring an AAA Scheme for an ISP Domain

You can configure a combined AAA scheme or separate AAA scheme on the switch.
If both are configured, separate AAA schemes apply.
Once the authentication command is configured, separate AAA schemes, if any, apply.
Configuring a combined AAA scheme
You can configure a combined AAA scheme by using the scheme command.
Before configuring a combined AAA scheme, do the following:
For RADIUS or HWTACACS authentication, configure the RADIUS or HWTACACS scheme to be
referenced first. The local and none authentication methods do not require any scheme.
Determine the access mode or service type to be configured. With AAA, you can configure an
authentication method specifically for each access mode and service type, limiting the
authentication protocols that can be used for access.
Determine whether to configure an authentication method for all access modes or service types.
Table 2-4 Configure a combined AAA scheme
Operation
Enter system view
Command
system-view
2-3
Remarks
—