3Com 4210 9-Port Configuration Manual page 118

[DeviceA] vlan 2
[DeviceA-vlan2] quit
[DeviceA] voice vlan 2 enable
# Configure Ethernet 1/0/1 to operate in manual voice VLAN assignment mode.
[DeviceA] interface Ethernet 1/0/1
[DeviceA-Ethernet1/0/1] undo voice vlan mode auto
# Configure Ethernet 1/0/1 as a hybrid port.
[DeviceA-Ethernet1/0/1] port link-type hybrid
# Configure the voice VLAN as the default VLAN of Ethernet 1/0/1, and add the voice VLAN to the list of
untagged VLANs whose traffic is permitted by the port.
[DeviceA-Ethernet1/0/1] port hybrid pvid vlan 2
[DeviceA-Ethernet1/0/1] port hybrid vlan 2 untagged
# Enable the voice VLAN function on Ethernet 1/0/1.
[DeviceA-Ethernet1/0/1] voice vlan enable
Verification
# Display the OUI addresses, the corresponding OUI address masks and the corresponding description
strings that the system supports.
<DeviceA> display voice vlan oui
Oui Address Mask
0003-6b00-0000 ffff-ff00-0000
000f-e200-0000 ffff-ff00-0000
0011-2200-0000 ffff-ff00-0000
00d0-1e00-0000 ffff-ff00-0000
00e0-7500-0000 ffff-ff00-0000
00e0-bb00-0000 ffff-ff00-0000
# Display the status of the current voice VLAN.
<DeviceA> display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 1440 minutes
Current voice vlan enabled port mode:
PORT
--------------------------------
Ethernet1/0/1
Description
Cisco phone
3Com Aolynk phone
test
Pingtel phone
Polycom phone
3Com phone
MODE
MANUAL
1-14