Configuring A Self-Defined Dhcp Option - 3Com 4210 9-Port Configuration Manual

Specify an IP address for the network calling processor before performing other configuration.

Configuring a Self-Defined DHCP Option

By configuring self-defined DHCP options, you can:
Define new DHCP options. New configuration options will come out with DHCP development. To
support new options, you can add them into the attribute list of the DHCP server.
Extend existing DHCP options. When the current DHCP options cannot meet customers'
requirements (for example, you cannot use the dns-list command to configure more than eight
DNS server addresses), you can configure a self defined option for extension.
Follow these steps to configure a self-defined DHCP option:
To do...
Enter system view
Enter DHCP address pool view
Configure a self-defined DHCP
option
Be cautious when configuring self-defined DHCP options because such configuration may affect the
DHCP operation process.
Use the command...
system-view
dhcp server ip-pool pool-name
option code { ascii ascii-string | hex
hex-string&<1-10> | ip-address
ip-address&<1-8> }
2-13
Remarks
—
—
Required
Not configured by
default.