Aaa Configuration Examples; Per User Type Aaa Configuration Example - 3Com 4210 9-Port Configuration Manual

Operation
Delete buffered non-response
stop-accounting requests

AAA Configuration Examples

Per User Type AAA Configuration Example

Network Requirements
As shown in Figure
1/0/1 of Switch, and Host B, serving as a telnet user, accesses the network through Ethernet 1/0/2 of
Switch.
Configure the switch to use the RADIUS server to provide authentication, authorization, and
accounting services for users. The IP address of the server is 10.110.91.164.
Set the shared keys for authentication, authorization, and accounting packets exchanged with the
RADIUS server to aabbcc. Configure the switch to remove the domain name from a username
before sending the username to the RADIUS server.
Configure the switch to perform RADIUS authentication for Host A and local authentication for Host
B.
Figure 2-2 Configure different authentication methods based on user access types
Configuration Procedure
# Enter system view.
<Switch> system-view
# Configure the authentication method for telnet users.
[Switch] user-interface vty 0 4
[Switch-ui-vty0-4] authentication-mode scheme
# Configure the test domain.
[Switch] domain test
[Switch-isp-test] access-limit enable 10
[Switch-isp-test] quit
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
2-2, Host A, serving as an 802.1X user, accesses the network through Ethernet
Command
2-30
Remarks