Configuring Basic 802.1X Functions - 3Com 4210 9-Port Configuration Manual

Configuring Basic 802.1x Functions

Table 1-1 Configure basic 802.1x functions
Operation
Enter system view
Enable 802.1x globally
In system
view
Enable
802.1x for
specified
In port
ports
view
In system
view
Set port
access
control
mode for
specified
In port
ports
view
In system
view
Set port
access
method
for
In port
specified
view
ports
Set authentication
method for 802.1x
users
Enable online user
handshaking
Enter Ethernet port
view
Enable the
handshaking packet
secure function
Command
system-view
dot1x
dot1x interface interface-list
interface interface-type
interface-number
dot1x
quit
dot1x port-control
{ authorized-force |
unauthorized-force | auto }
[ interface interface-list ]
interface interface-type
interface-number
dot1x port-control
{ authorized-force |
unauthorized-force | auto }
quit
dot1x port-method { macbased |
portbased } [ interface
interface-list ]
interface interface-type
interface-number
dot1x port-method { macbased |
portbased }
quit
dot1x authentication-method
{ chap | pap | eap }
dot1x handshake enable
interface interface-type
interface-number
dot1x handshake secure
1-13
Remarks
—
Required
By default, 802.1x is disabled
globally.
Required
By default, 802.1x is disabled on all
ports.
Optional
By default, an 802.1x-enabled port
operates in the auto mode.
Optional
The default port access method is
MAC-address-based (that is, the
macbased keyword is used by
default).
Optional
By default, a switch performs CHAP
authentication in EAP terminating
mode.
Optional
By default, online user handshaking
is enabled.
—
Optional
By default, the handshaking secure
function is disabled.