3Com 4210 9-Port Configuration Manual page 722

To do...
Configure the
maximum number of
history records that can
be saved
Enable history record
Configure the retaining
time of history record
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the retaining
time of statistics
information
Configure test start
time and lifetime
Enable routing table
bypass
Configure the TTL
Configure the
automatic test interval
Configure the probe
timeout time
Configure the type of
service
Configure the type of
FTP operation
Configure an FTP login
username
Configure an FTP login
password
Configure a file name
for the FTP operation
Use the command...
history-records number
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time
keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
ftp-operation { get | put }
username name
password password
filename file-name
1-9
Remarks
Optional
By default, the maximum number is 50.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history
record is 120 minutes.
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime
is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, TTL is 20.
The sendpacket passroute command
voids the ttl command.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the service type is zero.
Optional
By default, the type of FTP operation is
get, that is, the FTP operation will get a
file from the FTP server.
Required
By default, neither username nor
password is configured.
Required
By default, no file name is configured for
the FTP operation