Table of Contents
Advertisement
4.8.14 MLD Group Information
Entries in the MLD Group Table are shown on this Page. The MLD Group Table is sorted first by VLAN ID, and then by group.
Each Page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per Page" input
field. When first visited, the web Page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table. The MLD
Groups Informatino screen in
The Page includes the following fields:
Object
VLAN ID
Groups
Port Members
Buttons
Auto-refresh
: Automatic refresh occurs every 3 seconds.
: Click to refresh the Page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.
4.8.15 MLDv2 Information
Entries in the MLD SFM Information Table are shown on this Page. The MLD SFM (Source-Filtered Multicast) Information Table
also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by
Port. Different source addresses belong to the same group are treated as single entry. Each Page shows up to 99 entries from
the MLD SFM Information table, default being 20, selected through the "entries per Page" input field. When first visited, the web
Page will show the first 20 entries from the beginning of the MLD SFM Information Table.
Figure 4-8-17
appears.
Figure 4-8-17: MLD Snooping Groups Information Page Screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
Ports under this group.
User's Manual of WGSW-48040HP
169
Advertisement
Table of Contents
