Qos Control Entry Configuration - Planet Networking & Communication WGSW-48040HP User Manual

 Frame Type
 Action
 Modification Buttons

4.9.11.1 QoS Control Entry Configuration

The QCE Configuration screen in
Indicates the type of frame to look for incomming frames. Possible frame types
are:
Any: The QCE will match all frame type.
■
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
■
allowed.
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
■
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS class.
■
DPL: Classified Drop Precedence Level.
■
DSCP: Classified DSCP value.
■
You can modify each QCE in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
Figure 4-9-13 appears.
Figure 4-9-13: QCE Configuration Page Screenshot
User's Manual of WGSW-48040HP
194