Table of Contents
Advertisement
Adding a new policy
Port Policies Configuration
Every port may advertise a unique set of network policies or different attributes for the same network policies, based on the
authenticated user identity or port configuration.
Object
Port
Policy ID
Buttons
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
4.14.4 LLDP-MED Neighbor
This Page provides a status overview for all LLDP-MED neighbors. The displayed table contains a row for each port on which an
LLDP neighbor is detected. The LLDP-MED Neighbor Information screen in
following information:
The Page includes the following fields:
Fast start repeat count
Object
Port
Click
Tag, VLAN ID, L2 Priority and DSCP for the new policy. Click "Save".
The number of policies supported is 32
Description
The port number for which the configuration applies.
The set of policies that shall apply for a given port. The set of policies is selected
by checkmarking the checkboxes that corresponds to the policies
Figure 4-14-3: LLDP-MED Neighbor Information Page Screenshot
Description
The port on which the LLDP frame was received.
User's Manual of WGSW-48040HP
to add a new policy. Specify the Application type,
Figure 4-14-3
304
appears. The columns hold the
Advertisement
Table of Contents
