Fujitsu M10-4 Service Manual page 120

# ldm start-reconf <root domain name>
2.
Create the virtual function.
# ldm create-vf <PF name>
3.
Log in to the root domain, and restart Oracle Solaris.
# telnet localhost <port name>
...
# shutdown -i6 -g0 -y
4.
Assign the virtual function (VF) to the I/O domain.
# ldm add-io <VF名> <I/O domain name>
5.
Start the I/O domain.
# ldm start <I/O domain name>
6. If virtual devices of a guest domain have been kept unused or the redundant
configuration was released in
devices," resume the use of the virtual devices or set the redundant
configuration again.
For details on the work, see the manual for the application being used.
7.
Confirm that the status of the physical I/O device is the same as before
maintenance.
# ldm list-io
8.
Confirm that the operating condition of the logical domain remains unchanged.
# ldm list-domain
Work to restore a virtual device
If a virtual device (vnet, vdisk) of a guest domain has been kept unused in
Stopping the use of the I/O
1.
If virtual devices of a guest domain have been kept unused or the redundant
configuration was released, resume the use of the virtual devices or set the
redundant configuration again.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ November 2014
106
device," return it to its original status.
"5.4.1 Releasing the assignment of I/O
"a.