Fujitsu M10-4 Service Manual page 235

- The connector for one PCIe cable facing the outside of the CPU memory unit
and the other two facing the front of the CPU memory unit
Figure 9-41 Removing the PCIe cables (with the connector for one PCIe cable
facing the outside and the other two facing the front of the CPU
memory unit)
14. Install the PCIe cables on the PCIBP board.
Connect the three PCIe cables by matching the PCle cable position labels with
the corresponding position marks on the PCIBP board (A in the figure).
The direction in which the PCIe cables are installed varies depending on the type
of the CPU memory unit.
Note - Do not attempt to install a PCIe cable in the wrong direction. If excessive force is used
to install a PCIe cable, it may be damaged.
Note - Ensure that the PCIe cables are firmly connected and secure.
Chapter 9 Maintaining the CPU Memory Unit/Memory 221