Fujitsu M10-4 Service Manual page 132

Figure 7-5 Active/hot replacement flow (for a PCI Express card)
1. Open rack door
2. Check operating condition of system and I/O
device usage status
3. Release assignment of PCIe card
4. Enable removal of faulty PCIe card
5. Lower cable support
6. Replace faulty PCIe card
7. Fix cable support
8. Incorporate replaced PCIe card
9. Confirm that there is no problem with
replaced FRU
10. Restore logical domain
11. Close rack door
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ November 2014
118
Maintenance complete