Fujitsu M10-4 Service Manual page 170

Figure 7-24 Active/cold removal flow (building block configuration only)
1. Open rack door
2. Check operating condition of system and
I/O device usage status
3. Release assignment of PCIe card
4. Release chassis requiring maintenance from
partition
5. Release chassis requiring maintenance from
system
6. Enable access to FRU requiring maintenance
7. Remove FRU for removal
8. Restore chassis requiring maintenance
9. Incorporate chassis requiring maintenance
into system
10. Diagnose chassis requiring maintenance
11. Incorporate chassis requiring maintenance
12. Confirm that there is no problem with
13. Restore logical domain
14. Close rack door
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ November 2014
156
into partition
chassis after removal
Removal complete