Job Flow Procedure; Step 1 Opening The [Job Flow Sheets] Screen - Fuji Xerox D110 User Manual

6 Job Flow Sheets

Job Flow Procedure

Job flow sheets are categorized into two types according to the target. One type of job
flow sheets targets scanned documents, and the other type targets files stored in
folders. This section describes the first type of job flow sheets, targeting scanned
documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job
Flow" (P.251).
The following describes the procedure to operate a job flow. Refer to the following
section for each procedure.
To create and register a job flow sheet, use a computer.

Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................266

Step 2 Selecting a Job Flow Sheet ............................................................................................267
Step 3 Confirming/Changing the Job Flow Sheet.....................................................................267
Step 4 Starting the Job Flow Sheet ...........................................................................................267
Note
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
6
1
Press the <Services Home> button.
2
Select [Job Flow Sheets].
Note
266
• To create a job flow sheet, use EasyOperator or Device Setup Tool. EasyOperator is
included in the Driver CD Kit provided with the machine. You can download Device Setup
Tool from Fuji Xerox website.
• WSD stands for Web Services on
Devices.
<Services Home> button