Step 5 Confirming The Copy Job In Job Status - Fuji Xerox D110 User Manual

3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat steps 3 and 4.
5
When all documents have been scanned,
select [Last Original].

Step 5 Confirming the Copy Job in Job Status

If copies are not output after you start the copy job, the job may be in pending status.
Use the following procedure to confirm the job status.
1
Press the <Job Status> button.
2
Confirm the job status.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
Copying Procedure
<Job Status> button
3
55