Table of Contents
Advertisement
2 Product Overview
No.
Component
3
<Error> indicator
4
<Main Power> indicator
5
<Custom 1> (Copy) button
2
6
<Custom 2> button
7
<Custom 3> (Review)
button
8
<Log In/Out> button
9
<Clear All> button
10
<Energy Saver> button
11
<Interrupt> button
12
<Stop> button
13
<Start> button
14
Numeric keypad
15
<Speed Dial> button
42
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper or
toner.
If the <Error> indicator blinks, contact our Customer Support Center.
If the <Error> indicator lights up, refer to "12 Problem Solving" > "Machine
Trouble" in the Administrator Guide.
Lights up when the main power is switched on.
Note
• If the main power is not switched on, the machine will not be
powered on even when the power is switched on.
"Copy" is assigned to this button by default.
Press this button to display the [Copy] screen.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine"> "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
Press this button to call its associated service.
To the button, you can assign [Language] or any service displayed on
the [Services Home] screen.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine" > "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
"Review" is assigned to this button by default.
On the [Review] screen, you can check a list of the status of Copy, and
Scan services whose settings have been changed from the defaults.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine" > "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
Lights up when a user is authenticated in the System Administration
mode, the Authentication mode, or the Accounting mode. Press this
button to display the User ID entry screen for entering the System
Administration mode, the Authentication mode, or the Accounting mode.
Also press this button to exit these modes.
Resets to the default values. The machine returns to the same state as
when it is powered on.
When the machine is not used for a while, it enters the Energy Saver
mode to reduce power consumption. When the Energy Saver mode is
active, the <Energy Saver> button lights up.
Press this button to enter or exit the Energy Saver mode.
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode. Refer to "13
Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
Press this button to pause the current job or communications.
Press this button to start scanning a document.
Use the numeric buttons on the keypad to enter the number of copies,
passwords, and other numerical values.
This button is not to be used.
Function
Advertisement
Table of Contents
