Table of Contents
Advertisement
Configuring/Starting Job Flow
Job Flow is a feature that allows you to register transfer settings of scan data, such as
a transfer method and destination, to simplify data-transfer tasks.
Job flow sheets are categorized into two types according to the target. One type of job
flow sheet targets files stored in folders, and the other type targets scan files. This
section describes the first type of job flow sheet, targeting files stored in folders.
A job flow operates files stored in a folder, and starts in either of the following ways: 1)
automatically start a job flow when a file is stored in a folder, or 2) select a job flow to
manually operate files stored in a folder.
To automatically start a job flow, you must make a link with a folder and a job flow sheet
in advance. Files are automatically processed with the job flow sheet when they are
stored in the linked folder.
Note
• When the Authentication feature is disabled, a job flow created in [Send from Folder] can
For information on job flows that target scan files, refer to "Job Flow Sheets" (P.265).
You can register the following features:
Forward
E-mail Notification
Print
There are restrictions to combinate features according to the way to store files in a
folder.
For information on the restrictions on the combination of features, refer to "5 Tools" > "Setup" > "Create
Job Flow Sheet" in the Administrator Guide.
Forward
Multiple forwarding recipients can be configured for each forwarding method.
FTP
Forwards via FTP. Up to 2 recipients can be specified.
SMB
Forwards via SMB. Up to 2 recipients can be specified.
Mail
Forwards via E-mail. Up to 100 recipients can be specified.
E-mail Notification
You can receive the job results by e-mail.
For more information, refer to "5 Tools" > "Setup" > "Create Job Flow Sheet" > "Create New Job Flow
Sheet" in the Administrator Guide.
Print
Files in a folder can be printed.
only be used/edited/duplicated/deleted through the folder where the job flow is created. This
type of job flow is not displayed on the [Create Job Flow Sheet] screen. When the
Authentication feature is enabled, job flows whose owners are authenticated are displayed
on the [Create Job Flow Sheet] screen.
Configuring/Starting Job Flow
251
5
Advertisement
Table of Contents
