Fs - N - Citizen CT-S280 Command Reference Manual

FS - n

Support model
[Function] Setting/canceling Kanji underline
[Code] <1C>H<2D>H<n>
[Range] 0≤n≤2, 48≤n≤50
[Outline] [The specification which is common to the model]
• Sets or cancels Kanji underline.
n
0, 48
1, 49
2, 50
[Caution] [The specification which is common to the model]
• Underline is applied to all width of printed characters but not applied to the part skipped by HT.
• Underline is not applied to the character rotated 90° clockwise.
[See Also] FS ！
[Sample Program]
LPRINT CHR$(&H1C);"&";
LPRINT CHR$(&H1C);"-"; CHR$(0);
LPRINT CHR$(&H34); CHR$(&H41);
LPRINT CHR$(&H3B); CHR$(&H7A);
LPRINT CHR$(&H1C);"-"; CHR$(1);
LPRINT CHR$(&H34); CHR$(&H41);
LPRINT CHR$(&H3B); CHR$(&H7A);
LPRINT CHR$(&HA);
LPRINT CHR$(&H1C);".";
CT-S280 CT-S300
CT-S310
CT-S281
Function
Cancels Kanji underline
Sets 1-dot width Kanji underline
Sets 2-dot width Kanji underline
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
[Print Results]
Canceling Kanji underline
漢字漢字
Setting Kanji underline
- 172 -
BD2-2220 PMU series
CT-P29x series CT-S310 II