Fn=11: Function 11 Setting Communication Conditions - Citizen CT-S280 Command Reference Manual

fn=11: Function 11 Setting Communication Conditions

GS ( E pL pH fn a d1...dk
[Code] <1D>H<28>H<45>H<pL><pH><fn><a><d1>...<dk>
[Range] 3≤(pL+pH×256)≤65535(0≤pL≤255, 0≤pH≤255)
fn=11
1≤a≤4 (Not changed in other than specified range)
48≤d≤57 (Not changed in other than specified range)
1≤k≤6
[Outline] [The specification which is common to the model]
• Sets the communication conditions of serial interface specified by "a".
• a=1: Setting baud rate
◎---support by
CT-S280, CT-S281, CT-S2000, CT-S4000, CT-S801, CT-S851, CT-S601, CT-S651,
●---support by
CT-S280, CT-S2000, CT-S4000, CT-S801, CT-S851, CT-S601, CT-S651,
* : Prohibit the use of 57600.
PMU2XXX
△---Default :
CT-S300, CT-S310, CT-S2000(JPN/EUR),
▲---Default :
CT-S280, CT-S281, CT-S2000(USA),
BD2-2220,
• a=2: Setting to specified parity
• a=3: Setting to specified flow control
• a=4: Setting to specified data length
• Operates only in printer function setting mode.
• Which of dip SW or memory SW is used at initialization depends on "Selecting communication condition
setting" of dip SW1-1.
Baud Rate d1
1200 49("1")
◎
2400 50("2")
4800 52("4")
9600 57("9")
▲
19200 49("1")
△
38400 51("3")
●57600 53("5")
●115200 49("1")
CT-P29x series
CT-S4000(USA)
PMU series, CT-P29x series,
d1 Parity Setting
48 (Default)
49 Odd parity
50 Even parity
d1 Flow Control
48 (Default)
49 XON/XOFF
d1 Setting Data Length
55 7-bit length
56 (Default) 8-bit length
d2 d3
50("2") 48("0")
52("4") 48("0")
56("8") 48("0")
54("6") 48("0")
57("9") 50("2")
56("8") 52("4")
55("7") 54("6")
49("1") 53("5")
does not support 115200bps.
CT-S4000(JPN/EUR)
, CT-S801, CT-S851, CT-S601, CT-S651,
CT-S310II
No parity
DSR/DTR
- 300 -
d4 d5
48("0") -
48("0") -
48("0") -
48("0") -
48("0") 48("0")
48("0") 48("0")
48("0") 48("0")
50("2") 48("0")
CT-S310II
PMU series, CT-S310II
d6
-
-
-
-
-
-
-
48("0")