Cutter Commands; Esc I - Citizen CT-S280 Command Reference Manual

2.2.11 Cutter Commands

ESC i

Support model
[Function] Full cutting of paper
[Code] <1B>H<69>H
[Outline] [The specification which is common to the model]
• Executes full cutting of paper.
[Caution] [The specification which is common to the model]
• This command only works it is entered at the beginning of a line.
• Before cutting paper, feed the paper more than the cutting position of paper from the print position. Without
this paper feeding, the character just after printing remains before the cutter.
MSW4-8=ON: This command works as partial cut command.
[The specification which depend on the model]
CT-P290/292
•
This command does not function.
CT-S300/CT-S310/CT-S2000/CT-S4000/
CT-S801/CT-S851/CT-S601/CT-S651/PMU series
• With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
[Sample Program]
LPRINT "AAAAA";
LPRINT CHR$(&H1B);"J";
LPRINT CHR$(150);
LPRINT CHR$(&H1B);"i";
CT-S280 CT-S300
CT-S310
CT-S281
[Print Results]
AAAAA
AAAAA
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Cut position
Paper feed
direction
- 138 -
BD2-2220 PMU series
CT-P29x series CT-S310 II
Cut state