Appendix; Explanation; Overview; Values Set By Each Command In Standard Mode And - Citizen CT-S280 Command Reference Manual

Hide thumbs Also See for CT-S280:
Table of Contents

Advertisement

5. APPENDIX

5.1 Explanation on PAGE MODE

5.1.1 Overview

The printer has two print modes: STANDARD and PAGE.
In STANDARD MODE, the printer prints or feeds paper each time it receives a print or paper feed command. In PAGE MODE,
when the printer receives print commands and/or form feed commands, it simply forwards them to the specified print area of
memory. Only when an ESC FF or FF is executed all the data mapped in the print area will then be printed in a batch.
For example, suppose you executed a print and line feed for data "ABCDEF"<LF>. In STANDARD MODE, the data "ABCDEF" is
printed and paper is advanced one line. In PAGE MODE, the data "ABCDEF" is written in the specified print area of memory, and
the memory location for the storage of the next print data is shifted one line.
The printer enters PAGE MODE with an ESC L, so that all commands received after that point are handled in PAGE MODE. When
an ESC FF is executed, the data received until then is printed in a batch. When an FF is executed, the data received until then is
printed in a batch, after which the printer returns to STANDARD MODE. An ESC S causes the printer to immediately return to
STANDARD MODE; any print data, however, that has been stored in PAGE MODE is not printed. Instead it will be cleared.
STANDARD MODE
5.1.2 Values Set by Each Command in STANDARD MODE and PAGE MODE
(1) The values set with commands are common to the STANDARD MODE and PAGE MODE. The values set with any of the
commands listed below are, however, treated differently and stored separately for the STANDARD and PAGE MODES.
• ESC SP, ESC 2, ESC 3, FS S
(2) The maximum printable size of a bitmap image is 576 dots for STANDARD MODE. In PAGE MODE, the maximum printable
size of a bitmap image is 831 dots in the "y" direction (paper feed direction). (However 831 dots are reserved for "y" of the
print area set by ESC W and the value of print direction "n" specified by ESC T is 1 or 3.)
ESC L
ESC S
Print
[Switching Between STANDARD MODE and PAGE MODE]
PAGE MODE
FF
- 435 -
ESC FF
Print

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents