Gs B N - Citizen CT-S280 Command Reference Manual

GS B n

Support model
[Function] Specifying/canceling the black/white inverted printing
[Code] <1D>H<42>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command specifies or cancels the black/white inverted printing.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
0
1
[Caution] [The specification which is common to the model]
• The black/white inversion works on internal and downloaded characters.
• The black/white inversion works also on the right spacing of characters defined by ESC SP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI characters, or the skip
area specified by HT, ESC $, or ESC \.
• This command does not affect the space between lines.
• Black/white inversion specification takes precedence over underline specification. Underline printing specified is,
therefore, nullified if black/white inversion is specified; the underline setting, however, remains unchanged.
[Default] n=0
CT-S280 CT-S300
CT-S310
CT-S281
The black/white inverted printing is canceled.
The black/white inverted printing is specified.
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Function
- 82 -
BD2-2220 PMU series
CT-P29x series CT-S310 II