Table of Contents
Advertisement
2.11.1 Ports
Configuration
Number of Classes
Ingress Configuration
Port
Default Class
QCL #
Tag Priority
Egress Configuration
Queuing Mode
Queue Weighted
Description
Configure the number of traffic classes as "1", "2", or "4". The default value is "4".
The logical port for the settings contained in the same row.
Configure the default QoS class for the port, that is, the QoS class for frames not
matching any of the QCEs in the QCL.
Select which QCL to use for the port.
Select the default tag priority for this port when adding a Tag to the untagged frames.
Select which Queuing mode for this port.
Strict Priority: High class queue is served first always till it is empty
Weighted: The queues are served based on the weight ratios set below.
Setting Queue weighted (Low:Normal:Medium:High) if the "Queuing Mode" is
"Weighted".
-73-
Advertisement
Table of Contents
