KTI Networks KGS-2421 User Manual page 104

Packets Dropped
Access Requests
Access Retransmissions RFC4670 name: radiusAuthClientExtAccessRetransmissions
Pending Requests
Timeouts
State
Round-Trip Time
The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason.
RFC4670 name: radiusAuthClientExtPacketsDropped
The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason.
RFC4670 name: radiusAuthClientExtAccessRequests
The number of RADIUS Access-Request packets sent to the server. This does not
include retransmissions.
The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server.
RFC4670 name: radiusAuthClientExtPendingRequests
The number of RADIUS Access-Request packets destined for the server that have not
yet timed out or received a response. This variable is incremented when an
Access-Request is sent and decremented due to receipt of an Access-Accept,
Access-Reject, Access-Challenge, timeout, or retransmission.
RFC4670 name: radiusAuthClientExtTimeouts
The number of authentication timeouts to the server. After a timeout, the client may
retry to the same server, send to a different server, or give up. A retry to the same
server is counted as a retransmit as well as a timeout. A send to a different server is
counted as a Request as well as a timeout.
Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get
re-enabled when the dead-time expires. The number of seconds left before this occurs
is displayed in parentheses. This state is only reachable when more than one server is
enabled.
RFC4670 name: radiusAuthClientExtRoundTripTime
The time interval (measured in milliseconds) is between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched it from the
RADIUS authentication server. The granularity of this measurement is 100 ms. A
value of 0 ms indicates that there hasn't been round-trip communication with the
server yet.
-104-