Table of Contents
Advertisement
2.5.2 MSTI Mapping
Configuration
Configuration Name
Configuration Revision The revision of the MSTI configuration named above. This must be an integer
MSTI Mapping
MSTI
VLANs Mapped
Description
The name identifying the
Bridges must share the name and revision (see below), as well as the VLAN-to-MSTI
mapping configuration in order to share spanning trees for MSTI's. (Intra-region)
The name is at most 32 characters.
between 0 ~ 65535.
The bridge instance
The CIST is not available for explicit mapping, as it will receive the VLANs not
explicitly mapped.
The list of VLAN's mapped to the MSTI. The VLANs must be separated with
comma and/or space. A VLAN can only be mapped to one MSTI. An unused MSTI
should just be left empty. (i.e. not having any VLANs mapped to it.)
VLAN
to MSTI mapping
-45-
Advertisement
Table of Contents
