Making Network Connections; Network Switched Ports; Network Ports - KTI Networks KS-280 Installation Manual

3. Making Network Connections

3.1 Network Switched Ports

There are eight ports on the switch for connection to eight LAN seg-
ments. Each segment is an independent shared network in one collision-
domain.
All ports are 10/100Mbps-based dual-speed switched port. Each can
support one connection to either a 10Mbps Ethernet segment or a
100Mbps Fast Ethernet segment. It features the capability of auto-sens-
ing the speed of the connected segment.
The following table illustrates the connectivity supported by each port:
PORT
Port #1-#7
Port #8
Figure 3-1 Network Ports
CONNECTION
10BASE-T or
100BASE-TX
10BASE-T or
100BASE-TX or RJ-45 connector over UTP
100BASE-FX
CONNECTOR & CABLES
RJ-45 connector over UTP
RJ-45 connector over UTP
RJ-45 connector over UTP
Optional fiber module over fiber
1 1