Table of Contents
Advertisement
Priority
DSCP
Auto-refresh
Refresh
3.7.3 Port Statistics
Global Status
Neighbor entries were last changed at
Total Neighbors Entries Added
802.1Q-2003, meaning that only the IEEE 802.1D priority level is significant and the
default PVID of the ingress port is used instead.
Priority is the Layer 2 priority to be used for the specified application type.One of
eight priority levels (0 through 7)
DSCP is the DSCP value to be used to provide Diffserv node behavior for the
specified application type as defined in IETF RFC 2474. Contain one of 64 code
point values (0 through 63).
Check this box to enable an automatic refresh of the page at regular intervals.
Click to refresh the page; any changes made locally will be undone.
Description
Shows the time of the last entry was last deleted or added. It is also shows the time
elapsed since last change was detected.
Shows the number of new entries added since switch reboot.
-118-
Advertisement
Table of Contents
