Table of Contents
Advertisement
Role
State
Path Cost
Edge
Point2Point
Uptime
Auto-refresh
Refresh
3.5.2 Port Status
Configuration
Port
The current STP port role. The port role can be one of the following values:
AlternatePort, BackupPort, RootPort, DesignatedPort.
The current STP port state. The port state can be one of the following values:
Blocking, Learning, Forwarding.
The current STP port path cost. This will either be a value computed from the Auto
setting, or any explicitly configured value.
The current STP port (operational) Edge Flag. An Edge Port is a switch port to which
no Bridges are attached. The flag may be automatically computed or explicitly
configured. Each Edge Port transits directly to the Forwarding Port State, since there
is no possibility of it participating in a loop.
The current STP port point-to-point flag. A point-to-point port connects to a
non-shared LAN media. The flag may be automatically computed or explicitly
configured. The point-to-point properties of a port affect how fast it can transition
STP state.
The time since the bridge port was last initialized.
Check this box to enable an automatic refresh of the page at regular intervals.
Click to refresh the page; any changes made locally will be undone.
Description
The switch port number of the logical STP port.
-111-
Advertisement
Table of Contents
