Auth Server; Radius Overview - KTI Networks KGS-2421 User Manual

Web management interface / 24-port gigabit switch mit 4x sfp-ports
Hide thumbs Also See for KGS-2421:
Table of Contents

Advertisement

CPU
CPU Once
Counter
Conflict
Auto-refresh
Refresh

3.3.2 Auth Server

3.3.2.1 RADIUS Overview

Configuration
RADIUS Authentication Servers
#
IP Address
Status
Forward packet that matched the specific ACE to CPU
Forward the first packet that matched the specific ACE to CPU.
The counter indicates the number of times the ACE was hit by a frame.
Indicates the hardware status of the specific ACE. The specific ACE is not applied to
the hardware due to hardware limitations.
Check this box to enable an automatic refresh of the page at regular intervals.
Click to refresh the page; any changes made locally will be undone.
Description
The RADIUS server number
Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this
server.
The current state of the server
This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get
re-enabled when the dead-time expires. The number of seconds left before this occurs
-102-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kgs-1620

Table of Contents