Lldp; Neighbors - KTI Networks KGS-2421 User Manual

Refresh
Clear

3.7 LLDP

3.7.1 Neighbors

Status
Local Port
Chassis ID
Remote Port ID
System Name
Port Description
System Capabilities
Management Address
Auto-refresh
Click to refresh the page; any changes made locally will be undone.
Click to clear all counters.
Description
The port on which the
The Chassis ID is the identification of the neighbor's LLDP frames.
The Remote Port ID is the identification of the neighbor port.
System Name is the name advertised by the neighbor unit.
Port Description is the port description advertised by the neighbor unit.
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
3. Bridge
5. Router
7. DOCSIS cable device
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for instance
hold the neighbor's IP address.
Check this box to enable an automatic refresh of the page at regular intervals.
LLDP frame was received.
2. Repeater
4. WLAN Access Point
6. Telephone
8. Station only
-114-