Table of Contents
Advertisement
Configuration
Port
Path Cost
Priority
Save
Reset
Description (Example with MSTI1)
The switch port number of the corresponding STP CIST (and MSTI) port.
Controls the path cost incurred by the port. The Auto setting will set the path cost as
appropriate by the physical link speed, using the 802.1D recommended values. Using
the Specific setting, a user-defined value can be entered. The path cost is used when
establishing the active topology of the network. Lower path cost ports are chosen as
forwarding ports in favor of higher path cost ports.
Valid values: 1 ~ 200000000
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-50-
Advertisement
Table of Contents
