Table of Contents
Advertisement
2.3.1.5.2 Communities
Configuration
Delete
Community
Source IP
Source Mask
Add new community
Delete
Save
Reset
Description
Check to delete the entry. It will be deleted during the next save.
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is the ASCII characters from
33 to 126. The community string will treat as security name and map a SNMPv1 or
SNMPv2c community string.
Indicates the SNMP access source address. A particular range of source addresses can
use to restrict source subnet when combined with source mask.
Indicates the SNMP access source address mask.
Click to add a new community entry as shown below.
Click to cancel the new entry.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-23-
Advertisement
Table of Contents
