Table of Contents
Advertisement
2.11.3 Rate Limiters
Configuration
Port
Policer Enabled
Policer Rate
Policer Unit
Shaper Enabled
Shaper Rate
Shaper Unit
Save
Reset
Description
The logical port for the settings contained in the same row.
Enable or disable the port policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
Configure the unit of measure for the port policer rate as kbps or Mbps. The default
value is "kbps".
Enable or disable the port shaper. The default value is "Disabled".
Configure the rate for the port shaper. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps".
Configure the unit of measure for the port shaper rate as kbps or Mbps. The default
value is "kbps".
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-76-
Advertisement
Table of Contents
