Table of Contents
Advertisement
Trap Authentication Failure Indicates the SNMP entity is permitted to generate authentication failure traps.
Trap Link-up and Link-down Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:
Trap Inform Mode
Trap Inform Timeout
Trap Inform Retry Times
Trap Probe Security Engine ID Indicates the SNMP trap probe security engine ID mode of operation. Possible values are:
Trap Security Engine ID Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using
Trap Security Name
Save
Reset
separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a
special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following
legally IPv4 address. For example, '::192.1.2.34'.
Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Enabled: Enable SNMP trap link-up and link-down mode operation.
Disabled: Disable SNMP trap link-up and link-down mode operation.
Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout (seconds). The allowed range is 0 ~ 2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 ~ 255.
Enabled: Enable SNMP trap probe security engine ID mode of operation.
Disabled: Disable SNMP trap probe security engine ID mode of operation.
USM for authentication and privacy. A unique engine ID for these traps and informs
is needed. When "Trap Probe Security Engine ID" is enabled, the ID will be probed
automatically. Otherwise, the ID specified in this field is used. The string must
contain an even number between 10 and 64 hexadecimal digits, but all-zeros and
all-'F's are not allowed.
Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for
authentication and privacy. A unique security name is needed when traps and informs
are enabled.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-22-
Advertisement
Table of Contents
