Making Network Connections; Switched Ports; Making Utp Connections - KTI Networks KS-105F-B Series Installation Manual

3. Making Network Connections

3.1 Switched Ports

The following figure shows the locations of the switched ports:

3.2 Making UTP Connections

10/100 TP Port Configuration
All 10/100 TP ports support configuration as follows:
Auto-negotiation capable
Highest capability : 100M Full duplex
Speed : auto-sensing for 100Mbps or 10Mbps
Duplex : Full duplex, Half duplex
Auto MDI-X function
The following table lists the configuration used for the 10/100 port when
it connects to different devices:
Connected Device
10BASE-T hub port
100BASE-TX hub port
Auto-negotiation port
Non-auto*1 half-duplex port
Non-auto full-duplex port
*1 Non-auto : non-auto-negotiation
*2 speed is determined by auto-sensing function
Configuration Used
10Mbps, half-duplex
100Mbps, half-duplex
Determined via auto-negotiation process
auto-speed-sensing *2, half-duplex
Not supported
-11-