Table of Contents
Advertisement
Ingress Filtering
Frame Type
Port VLAN Mode
Port VLAN ID
Save
Reset
disabled (no checkmark).
Enable ingress filtering for a port by checking the box. This parameter affects VLAN
ingress processing. If ingress filtering is enabled and the ingress port is not a member
of the classified VLAN of the frame, the frame is discarded. By default, ingress
filtering is disabled (no checkmark).
Determines whether the port accepts all frames or only tagged frames. This parameter
affects VLAN ingress processing.
All: all frames are accepted. (Default)
Tagged: Only tagged frames are accepted. Untagged frames received on the port are
discarded.
Configures the Port VLAN Mode. This parameter affects VLAN ingress and egress
processing.
None: a VLAN tag with the classified VLAN ID is inserted in frames transmitted on
the port. This mode is normally used for ports connected to VLAN aware switches.
Specific: (the default value) a Port VLAN ID can be configured (see below).
Untagged frames received on the port are classified to the Port VLAN ID. If VLAN
awareness is disabled, all frames received on the port are classified to the Port VLAN
ID. If the classified VLAN ID of a frame transmitted on the port is different from the
Port VLAN ID, a VLAN tag with the classified VLAN ID is inserted in the frame.
Configures the VLAN identifier for the port. The allowed values are 1 through 4095.
The default value is 1.
Note: The port must be a member of the same VLAN as the Port VLAN ID.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-67-
Advertisement
Table of Contents
