Table of Contents
Advertisement
2.3.2.2 ACL
2.3.2.2.1 Ports
Configure the
ACL
parameters (ACE) of each switch port. These parameters will affect frames
received on a port unless the frame matches a specific ACE.
Configuration
Port
Policy ID
Action
Rate Limiter ID
Port Copy
Shutdown
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 1 ~ 8. The default value
is 1.
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
Select which rate limiter to apply to this port. The allowed values are Disabled or the
values 1 ~ 15. The default value is "Disabled".
Select which port frames are copied to. The allowed values are Disabled or a specific
port number. The default value is "Disabled".
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
-33-
Advertisement
Table of Contents
