Framing Dimensions With Negative Vent Run - Regency Horizon HZ42STEPV Owners & Installation Manual

FRAMING DIMENSIONS WITH NEGATIVE VENT RUN INSTALLATIONS
A * Framing Depth *
B Framing Height
C Framing Width
D Framing Width - negative vent off end of unit
E Framing Width - installed as an island with a
** All other dimensions from the previous page remain the same for these installations.
Wood Studs
Note: All studs on top and sides of unit must be on edge.
All studs metal - unless otherwise indicated.
Regency Horizon™ HZ42STEPV Gas Fireplace
HZ42STEPV Framing Dimensions with Negative Run
negative run off end of unit
C
D
C
E
Rigid pipe adaptor
Parts required for a negative vent run
**minus 2x the fi nished material thickness
50" (1270mm) Horizontal or Vertical Vent
A
B
Framing for a negative vent run off the end of the unit.
A
B
45° elbow
INSTALLATION
15" (381mm)
36-3/4" (933mm)
63" (1600mm)
75" (1905mm)
Wood Studs
Wood Studs
Framing as an island with a negative vent run off the end of
the unit.
90° elbow
15