Table of Contents
Advertisement
INSTALLATION
10) From the wire harness, plug the FCM wire into the fan control module.
11) Install the fan control module onto the fl oor of the unit. Place it to the
right of the receiver.
12) Plug fan control module into receptacle located on the left hand side of
the unit.
13) Match the remote control to the receiver - see remote control
instructions.
14) Reverse step 1.
15) Check to ensure there are no gas leaks..
36
Fan Control Module
FCM wire
Regency Horizon™ HZ42STEPV Gas Fireplace
Advertisement
Table of Contents
